Jjc RM-E10 Uživatelský manuál stáhnout pdf

JJC RM-E10

Infrared Remote Control Instruction

Thank you for purchasing JJC RM-E10 Infrared Remote Control. For the best performance, please

read this instruction carefully before use.

z Identifying the buttons

¾ 2 SEC button （shutter release in 2 seconds）

¾ SHUTTER button (shutter is released right away)

z To use RM-E10 Remote Control

1. For the first time use, please pull out the plastic separator (if your remote control has it) at the

battery holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

3. To shoot with the RM-E10 Remote control, set the drive mode to ( Remote control).

4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within

+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and

press the shutter-release button on the remote control (when using the remote outdoors, make

sure that the subject is not backlit and that the line of site between the transmitter and the

infrared receiver is not blocked by the lens or other obstacles).

5. Press the SHUTTER button, the shutter is released right away.

6. Press 2 SEC button, the shutter is released about two seconds later.

7. Verify that the subject is visually in focus, and point the transmitter at the remote sensor located

on the front of the camera, and then press the SHUTTER or 2 SEC button.

8. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the

front end of the remote control when operating.

1 2 3

JJC RM-E10 Infrared Remote Control Instruction Thank you for purchasing JJC RM-E10 Infrared Remote Control. For the best performance, please read

z More information about use RM-E10 Remote Control 1. You cannot use the other drive modes (Continuous advanced, etc.). 2. To lock the focus, pre

z Specification • Easy-to-replace CR2025 lithium battery. • Operating temperature: 5 °C to 40 °C (40 °F to 105 °F). • Typical Battery Life: up

Žádné komentáře

Jjc RM-E10 Uživatelský manuál